User's Manual

7
Notes for receiver:
A full charge will take about 2.5 hours, which can power the receiver for about
180 minutes continuously.
You are recommended to have the battery fully charged before its first
installation to optimize its life.
Do not burn or disassemble the Li-battery.
Do not short-circuit the battery as it may cause fire or electric shock.
CAMERA LED INDICATOR
Red on
Off
Green on
Yellow on
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/Finish Charging
Power on
Charging when Power on
RECEIVER LED INDICATOR
Red on
Off
Green on
Yellow on
Flash green
STATUS
Charging when Power off
Power off (disconnect with cigarette lighter)/ Finish Charging
Power on
Charging when Power on
Low battery
If the battery is exhausted, please recharge it with the charging cable.
Cover the back with weatherproof cover in rainy day if necessary.
Notes for camera:
Using the Camera
1. Before using, make sure the camera is full charged. Press the Power
ON/OFF button to power on your camera.
3. The camera/receiver can work during charging. Press the Power ON
/OFF button to power on the camera/receiver, then you can use it.
Camera
Receiver