English Swift Hitch TM User's Manual Portable Wireless Camera System with Infrared Night Vision Model: SH01 Please read this manual carefully and thoroughly before any attempt to install and operate this product and retain it for your future reference.
TABLE OF CONTENTS INTRODUCTION Notice Approval Information Warranty Restrictions Maintenance PRODUCT Package Contents Feature Locations FIRST TIME USAGE Charging the Camera and Receiver Using the Camera Night Vision SPECIFICATIONS TROUBLESHOOTING EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
INTRODUCTION Thank you for your interest and support in our product and purchasing this wireless camera kit. This product works at ISM-2.4GHz frequency band, which could be legally used worldwide without permission. We feel confident that you will be pleased with the quality and features of this product. The camera features one CMOS image sensor and a transmitting module to capture the image and transmit them wirelessly.
Approval Information All our products meet the requirements of approval FCC , and are granted the FCC certification. They are authorized to bear FCC mark. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Restrictions 1. DO NOT use this product to violate one's privacy. Monitoring one's activities without consent is illegal and this product is not designed and manufactured for such purpose; 2. DO NOT put this product near any medical equipment. Radio waves might potentially cause breakdown of electrical medical equipment. So this product should be placed at least 1 foot away from any heart pacemaker. Radio waves might potentially influence heart pacemaker and lead to respiratory disturbance; 3.
PRODUCT Package Contents This package comes with the following items. Please check whether they are all included in the packaging box, if one or some is missing, contact the retailer for replacement. ① 2.4GHz Wireless Camera×1 ② 2.
Feature Locations 1. Camera Antenna Power Jack LED Weatherproof cover Infrared Lights Power ON/OFF Lens Magnetic stand 2.
FIRST TIME USAGE Charging the Camera and Receiver 1. Load a Li-battery to the battery compartment with its polarities matched. Note: Make the contacts contacting first and then put the other end of the battery in the compartment. 2. Connect the camera/receiver with auto cigarette lighter by the "Y" shaped charging cable. Your camera and receiver are being charged. A full charge will take about 2 hours for camera and 2.5 hours for receiver.
3. The camera/receiver can work during charging. Press the Power ON /OFF button to power on the camera/receiver, then you can use it. Receiver Camera Notes for camera: If the battery is exhausted, please recharge it with the charging cable. Cover the back with weatherproof cover in rainy day if necessary.
2. Mount the Magnetic Camera on your tailgate. Then adjust it to a suitable angle from your receiver. 3. View yourself backing up on the display. Hitch your ride. Night Vision The built-in Infra-red lights in camera provide night vision for low light conditions. The Infra-red lights will be automatically activated at night. The picture will turn to Black & White (monochrome) in Night Vision status.
SPECIFICATIONS CAMERA ITEMS Imaging Sensor CMOS Total Pixels View Angle Minimum Illumination Transmission Frequency Transmission Power Value CMOS 628 × 582(PAL); 510 × 492(NTSC) 55o 5Lux/F1.
TROUBLESHOOTING When you experience the operation problems, please check and try the following yourself before claiming that it is the defective product or consulting the experienced technician. Abnormal Phenomena Possible Reasons/Solutions Check whether the camera/receiver is powered on. No image Adjust the lens of camera. Blur image 1. Interfered with other devices; 2. Check the distance & blocks.
