User's Manual

Note:
only
When entering channel scan mode through manual mode, you could exit by pressing
channel select button; while entering through selection, you could exit by sliding the
switch to or .
L
Mode Control M OFF
Receiver Mode Setup
The receiver can support up to 4 cameras working at the same time.
It provides mode ( ), mode ( ) and
mode ( ).
Power Off OFF Manual M Channel
Scan L
CH1
CH2
CH3
CH4
CH1
CH2
CH3
CH4
5s
5s
5s
5s
Channel Scan Mode
OFF-M-LOFF - M - L
3. mode: Slide switch to or press and
hold the channel select button more than 5s in mode to
enter channel scan mode. In channel scan mode, all the channels
will display one by one looping in turn per 5s.
Channel Scan Mode Control L
Manual
1. mode: Slide switch to to power the
receiver off;
Power Off Mode Control OFF
2. mode: Slide switch to to enter
mode. In manual mode, the receiver channel won't change until you
press the channel select/mode switch button;
Manual Mode Control M Manual
13
OFF-M-LOFF - M - L
OFF-M-LOFF - M - L