User's Manual

After entering U-Disk, you'll see a text file as shown in
Figure 5; you can set the file to enable/disable video
recording loop overwrite, select TV-OUT output system
and change TV-OUT password.
Figure 3 Figure 4
Figure 5 Figure 6
8
After entering U-Disk, open the configuration file as
shown in Figure 5; and then set it as shown in Figure 6:
(1) If configuration setting is “NTSC_PAL=1”, TV OUT
output system will be PAL; if configuration setting is
“NTSC_PAL=0”, TV OUT output system will be NTSC.
(2) If configuration setting is
“VIDEO_RECORD_MODE=1”the loop overwrite function
w i l l b e e n a b l e d ; i f c o n f i g u r a t i o n s e t t i n g i s
“VIDEO_RECORD_MODE=0”, the loop overwrite function
will be disabled.
WORDPAD
Fil e
Edi t
For mat
Vie w
Hel p