User's Manual

42
aee.com
frame, and then click “ ” again to set the current frame as
the ending frame.
Change Wi-Fi Connection Name and Password
1. Change the Wi-Fi connection name:
Connect your camera (with TF card installed) to the
computer and turn on your camera. On the computer,
double click "My Computer" to nd and enter the removable
disk, and then open the "
" WiFi.conf le in the folder
"MISC". Find "AP_SSID=AEE Magicam". Change the
content following the equal sign "=" to your desired name
and save it.
2. Change the Wi-Fi connection password:
Connect your camera (with TF card installed) to the
computer and turn on your camera. On the computer,
double click the icon "My Computer" to nd and enter the
removable disk, and then open the "
" WiFi.conf file
in the folder "MISC". Find "AP_PASSWD=AEE12345".
Change the content following the equal sign "=" to your
desired password (containing at least 8 digits and above)
and save it. (It supports 8-digit password only.)
In case of synchronous operation of the camera and the
Wi-Fi based remote control, MD10 will give priority to the
operation command from the camera.
Above images for reference only, subject to our available
App.