User's Manual

15
aee.com
15
[ 1 ]
[ 2
]
[ 3
]
[ 4 ]
[ 5 ]
[ 6 ]
[ 7 ]
Figure 16
[ 1 ] Power Indicator [ 2 ] Wi-Fi Indicator [ 3 ] Lock screw [ 4 ] Power Switch
[ 5 ] Charging Port (Mini USB port) [ 6 ] Pairing Button [ 7 ] Repeater Base
5.1.1 Wi-Fi Indicator
Indicates Repeater’s Wi-Fi status
Wi-Fi Indicator Description
Blue light is ON Wi-Fi Repeater is working properly
Blue light blinks fast (1.5s OFF, 0.3s ON) Wi-Fi Repeater is pairing with airborne Camera
Blue light blinks slowly (3s OFF,0.3 ON) Wi-Fi Repeater is successfully paired
5.1.2 Power Indicator
Indicates Repeater’s power supply status�
Power Indicator Description
Red light is ON Repeater power supply is normal or charging completes
Red light blinks Repeater is charging, or Repeater power is running out, please charge as soon as possible
5.1.3 Pairing Button
When the repeater is on, press and hold the Pairing Button for 3 seconds, the repeater will automatically restart for code re-pairing. Press and release the Pairing
button to check repeater's power level�
Press Pairing button
Press Pairing button once:
If Power Indicator blinks once, indicates that repeater has over 80% charge available
If Power Indicator blinks twice, indicates that repeater has over 50% charge available
If Power Indicator blinks three times, indicates that repeater is running out of Power
Long press Pairing button (3 seconds) Repeater restarts and you can re-pair codes
5.1.4 Code Pairing
If the Wi-Fi indicator fast blinks blue (1.5 seconds OFF, 0.3 seconds ON), or keeps ON, it is necessary to carry out pairing please re-pair with following steps:
(1)Switch on the power switch and Wi-Fi switch of came,then switch on the power switch of repeater.
(2)After the Wi-Fi indicator of camera blinks, and Wi-Fi indicator of repeater is on, press Paring Button of repeater until Wi-Fi indicator(blue) of repeater blinks
fast(0.3s on,1.5s off). Then press the "video recording stop button"of camera immediately (1 time per second).
When the repeater blue light indicator slow blinks(0.3s on,3s off), this indicates the paring completes.
(3)If pairing fails, please repeat step 1 and step 2.
5.2 How to use
Charging the Repeater
Connect the repeater to the repeater Adapter through the Mini USB port� It takes about 2 hours to fully charge the battery�
● Ensure the repeater has sufcient charge before each ight.
Switching on the Repeater
(1) Toggle Repeater power switch to ON.
(2) Wait until the Wi-Fi indicator blinks blue, indicating the Repeater is communicating properly.
(3) While using, ensure the Repeater’s LED side faces you, and ensure that visibility between the Repeater and quadcopter is unobstructed, to obtain maximum
communication distance�
● After the ight, in addition to switching off the quadcopter and remote control, remember to switch off the Reapeater, or else the Repeater’s battery will be
depleted�
6. Use the Tracker GT10
6.1 Keys and Indicators: