User's Manual

- 6 -

Step 3:

Complete connection.

Step 4:

Connect the charger to AC

220V power supply with the

supplied power cord; 4 LED

indicators of the charger will

be on and then you can set the

parameters of the charger.

3 Set Parameters and Start Charging

After the battery is connected to the charger, set the parameters for the charger as follows:

Battery

capacity

Range of current

regulation

Recommended

charging current

Voltage

Number

of cells

Charging

mode

Battery of remote control 5000mAh 0-3A 2.0-3.0A 11.1V 3S CHARGE

Battery of aircraft 4000mAh 0-6A 3.0A 14.8V 4S BALANCE

Battery of aircraft 6000mAh 0-6A 3.5A 14.8V 4S BALANCE

Battery of aircraft 8000mAh 0-6A 4.0A 14.8V 4S BALANCE

Set the charger according to the above table; the detailed operation method is as follows:

Charging aircraft battery:

1) Press

BATT

TYPE

STOP

to select a battery type, and call out LiPo BATT; the screen displays:

2) Press

START

ENTER

for conrmation, and the screen displays: ; then press

DEC

STATUS

INC

to select LiPo BALANCE, and the screen displays: .

3) Press

again for confirmation, and the current values begins to pulsate: