User's Manual

- 5 -
Step 3:
Loosen the tie and take out the battery.
* Take out the battery of the remote control:
Step Illustration Description
Step 1:
Rotate to open the battery cover
according to the direction of arrow
shown in the gure, and then remove
it.
Step 2:
Power plug
Disconnect the power plug and take
out the battery.
2 Connect the Battery to the Charger
* Connect the battery to the charger according to the steps shown below:
Step Illustration Description
Step 1:
Connect the two charger wires
according to the figure, and
pay attention to the polarity of
terminals.
Step 2:
Select the charging interface
corresponding to the number
of the cells (2S, 3S, 4S, 5S and
6S); connect the power plug
after connecting the charging
interface.