User's Manual

- 22 -
3) Formatting
The airborne camera can be formatted to remove all les in it. Make sure you do not need the data
before formatting!
Yes
4) Restore Factory Settings
This operation will restore all settings of this device to the factory settings.
Yes
5) Date Setting
a. Touch “Date Setting” to enter the setting interface of “Time Indication on Image”:
b. Touch “ ” or “ ” corresponding to settings of “Year, Month, Day, Hour, and Minute”, to complete
the settings of Year, Month, Day, Hour, and Minute.
c. Touch “Save” to complete setting.
Notice: When “Time Indication on Image” is ON, after “Save” is pressed to complete setting, date
and time will be indicated at the bottom right corner of the video and photo; when “Time Indication on
Image” is OFF, there will be no such indication. In the resolution mode of 1080I/50, date and time will
not be indicated in the video and photo.
* Language Selection