User's Manual

- 21 -
Notice: The continuous shooting (three) mode and the automatic continuous shooting mode
cannot be enabled simultaneously.
Local Settings of Airborne Camera
Touch to enter the interface of “Local Settings of Airborne Camera”:
1) Loop Recording: ON, OFF
When “Loop Recording” is ON, recording is saved as a segment le by each 10 min; if the space of the
memory card is not enough, the rst recording le will be overwritten automatically.
Notice: During airborne recording, the function of loop recording is valid only when the free
memory space of the camera is more than 200M.
2)Light Metering Mode
Average metering: use this mode when the luminance difference between the photograph subject and
the background is relatively slight and steady.
Central area metering: It is the default mode, applying to scenes when there is certain luminance
difference between the photograph background and the subject or the photograph subject relatively
accords with the background.
Central spot metering: It applies to small-sized subject under extremely bright or dark background.