User's Manual

- 17 -
Indication of airborne
recording status
Indication of
battery level
of aircraft
Indication of
GPS signal
strength
Indication of
speed value
Longitude
and latitude
of take-off
position
Throttle ne
adjustment
Airborne camera
resolution
1080P/25
Indication of
camera clock
Heading Indicator
Indication of free
memory space of
airborne camera
Indication of battery
level of remote control
Indication of altitude
Horizon instrument
(indication of roll and
pitch attitudes)
Longitude and latitude
of current position
Pitch ne adjustment
Course ne adjustment
Roll ne adjustment
Indication of local recording
status of remote control
Set Parameters on the Screen of the Remote Control
Press “M” to enter the interface of “Function Setting” of the remote control:
* Servo Checking
Check if the functions of joystick, flight mode switch and PTZ control knob on the remote control are
normal through “Servo Checking”.
Notice: Servo checking should be carried out before take-off.
Here are the steps for servo checking:
1. Press “M” to enter the interface of “Function Setting” of the remote control.
2. Touch “Servo Checking” to enter the setting interface:
3. At this moment, turn the left and right joysticks by the maximum angle possible, toggle the ight mode