User's Manual

- 15 -
Airborne camera
video recording
The airborne camera begins recording when it is pressed
once.
Shutter
Press it to take a photo (during recording of the airborne
device, the snapshot function is available in three
resolution modes: 1080p/25f, 960p/25f and 720p/25f).
Stop recording
The airborne camera stops recording when it is pressed
once.
Menu
Press “M” to enter the main menu of remote control.
Long press “M” for 5 seconds to send the command to
go home immediately; the aircraft will enter the go-home
mode after receiving the command.
Zoom “+”
Zoom control of camera: zoom in.
Zoom “-”
Zoom control of camera: zoom out.
Manual/automatic
ight switch
Turn upwards Turn downwards
Turn upwards: Manual ight mode.
Turn downwards: Automatic ight mode (GPS mode).
Power switch
Slide leftwards to turn it ON; slide it rightwards to turn it
OFF.
PTZ control knob
Lens upwards
Lens downwards
The angle of the camera can be adjusted by turning this
knob.
Preparations for the Remote Control
* Installation of Antennas