User's Manual

- 7 -
; press
DEC
STATUS
INC
at this moment to decrease or increase the current value;
press
START
ENTER
for conrmation after the current is adjusted to the proper value.
4) After confirmation of the current value, the voltage value begins to pulsate:
;
press
DEC
STATUS
INC
to select the corresponding voltage of the battery; press
START
ENTER
for conrmation after
the voltage is adjusted to the proper value.
5) After setting all parameters, hold
START
ENTER
for 2 seconods, and the charger begins to detect the battery;
after successful detection, press
START
ENTER
to start charging, or press
BATT
TYPE
STOP
to cancel charging.
6) After charging is completed, the charger sends out sounds, and the screen displays the following
information:
Charging completed
Charged capacity (mAh)
Battery voltage after
charging is completed (V)
Charging the battery of remote control:
1) Press
BATT
TYPE
STOP
to select a battery type, and call out LiPo BATT; the screen displays:
.
2) Press
START
ENTER
for conrmation, and the screen displays: .
3) Press
again for confirmation, and the current values begins to pulsate:
; at this moment press
DEC
STATUS
INC
to decrease or increase the current value;
press
START
ENTER
for conrmation after the current is adjusted to the proper value.