User's Manual

Unmanned Aircraft System
Professional·Advanced
- 59 -
Step Illustration Description
Step 1 Insert the radio antenna extension
cable and the video antenna extension
cables respectively into the RADIO,
VIDEO-1 and VIDEO-2 ports on the
auto tracking antenna according to the
direction shown in the figure, and
tighten them clockwise.
Step 2 Insert the radio antenna extension
cable and the video antenna extension
cables respectively into the RADIO,
VIDEO-1 and VIDEO-2 ports on the
ground station according to the
direction shown in the figure, and
tighten them clockwise.
Connect the Communication Cable
Insert the communication cable according to the direction shown in the figure below, and insert the other end to the
AUTO ANTENNA port on the ground station.
Start up the Auto Tracking Antenna
First, turn on the power switch of the ground station; then, turn on the power switch of the auto tracking antenna. The
Video antenna
extension cables
Radio antenna
extension cable
Insert the
video
antenna
extension
cable
Insert the
video
antenna
extension
cable
Insert the
radio
antenna
extension
cable
Insert the
communication
cable here
Insert the other
end of the
communication
cable