Manualshelf

User's Manual

ManualsBrandsShenzhen AEE Technology ManualsElectronicsUnmanned Aircraft Systems (Unmanned Aircraft)
59606162636465666768
Unmanned Aircraft System
ProfessionalยทAdvanced
- 58 -
Step Illustration Description
Step 1
Unfold the three legs of the tripod; turn the
knob clockwise; lengthen each leg to a proper
position and then counter-clockwise tighten
the knob.
Step 2
Press the button on the right side to push the
auto tracking device into the PTZ groove in
the direction of arrow.
Step 3
Tighten the knob on the left side to fix it.
Install the Antenna
Use the wrench to install 4pcs of screw by aligning them with the corresponding holes in the panel antenna, so as to
fix it to the auto tracking antenna, as shown in the figure below. Then, connect the 3pcs of antenna extension cable
on the panel antenna to the auto tracking device according to the following figure (shown in red lines).
Connect the Radio and Video Antenna Extension Cables
Screws