User's Manual

Unmanned Aircraft System
Professional·Advanced
- 46 -
2) Change altitude, speed and hold time of waypoint
Input the desired figures in the corresponding attribute values to change the altitude, speed and hold time of the
waypoint.
Notice: To edit the position and altitude of a waypoint, please make sure that altitudes of all waypoints are
applicable for the current terrain. Please see the description in the section of “Add Waypoint” for details.
Finish Mission Editing
Click [End Edit] in the Flying Mission Editor to finish flying mission editing, and all waypoint projection lines
change to green:
Upload Mission
After finishing waypoint editing, click [Upload] to upload the current flying mission to the UAV.
Download Mission
After the mission is successfully uploaded, click [Download] to verify if the mission uploaded is correct; the
following dialog box will pop up after “Download” is clicked:
Select “Yes” to save the current flying mission; select “No” to exit without saving.
Save Flying Mission