User's Manual

Unmanned Aircraft System
Professional·Advanced
- 42 -
If maps cannot be loaded normally after the ground station software is opened, please restart the software,
connect to the network and try loading again.
Connect Serial Ports
1. Connect serial port COM1 (ground station connects to the communication serial port)
Find [COM1
Connect] on the toolbar; please select serial port COM1, and click “Connect”. A dialog box
showing “Serial port opened” will pop up on the screen.
2. Connect serial port COM2 (ground station connects to the joystick serial port)
The dialog box of “Joystick Data” (as shown below) will pop up through ->. Menu ->. Tool ->. Joystick Data.
Select serial port COM2 and click “Connect” to connect the joysticks which are used to control the UAV. ->.
Check “Send Joystick Data”; the progress bars will have corresponding indications when the joysticks are
turned..
In case of any error in connection of serial ports, click “Close” on the toolbar and carry out reconnection.
Joystick Calibration:
After connecting serial port COM2, you can calibrate the joysticks according to the following steps. The
calibration function is mainly used to adjust the maximum, minimal and median values of the joysticks.