User's Manual

Unmanned Aircraft System
Professional·Advanced
- 34 -
15 AV jack Outputs real-time videos sent back by the airborne camera on the UAV
16 RJ45 network jack Connects external networks
17
Digital video transmission
antenna 2
Receives HD video signals
18 Power switch Connects to or disconnects from the main power
19 Radio antenna
Transmits flight commands; receives flight attitude, sensor information,
longitude and latitude, etc.
20 Manual/auto fly switch Switches between manual fly and auto fly modes
21 Zoom “+” Zoom control of camera: zoom in
22 Right joystick Manually controls the flight of the UAV, including roll and pitch channels
23 Keyboard, mouse Operates the industrial computer
24 Airborne video recording switch
Controls video recording of the airborne device
Turn it downward to enable airborne video recording; turn it upward to
disable airborne video recording
25 Airborne photo shooting button Controls photo shooting of the airborne camera
26 One-key routed flight button Commands the UAV to autonomously fly along the set route
27 One-key take-off button Controls autonomous take-off of the aircraft
28 One-key landing button Controls autonomous landing of the aircraft
29 One-key go home button Controls autonomous go-home of the aircraft
30 Reserved button /
31 Reserved button /
32 Local recording switch
Saves a video currently displayed on the display terminal to the local
memory
33 Ground station starting switch Turns on the ground control station
34 Reserved button /
35 Camera switch Switches the airborne camera
36 Reserved button /
37 Reserved button /
38 Reserved button /
Preparations for the Ground Control Station
Open and Fix the Top Cover
Open the top cover of the ground control station and use the support rod to fix it: