User's Manual

Unmanned Aircraft System
Professional·Advanced
- 26 -
Accelerometer calibration
Step Illustration UAV Remote control
1
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV horizontally
The calibration is
completed when
the numeric value
of battery level
indicated on the
display screen of
the remote
control and that
on the compass
change from
certain value to 0,
and then change
to certain value
from 0.
2
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV vertically with its
nose facing downward
3
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV with its nose
facing rightward
4
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV vertically with its
nose facing upward
5
Turn the left joystick of the remote control to
the lower right corner and the right joystick to
the lower left corner (keep this motion for 3-5s)
Place the UAV with its nose