User's Manual

- 48 -
Loop Recording
When “Loop Recording” is ON, recording is
saved as a segment le by each 10 min; if the
space of the memory card is not enough, the rst
recording le will be overwritten automatically.
Time Indication
Show or hide time display.
9 Loading Setting
Click [Loading Settings] on the toolbar to load the current settings of the airborne camera.
10 Save Settings
Click [Save Settings] on the toolbar to save the current settings of the airborne camera.
Important notice: Settings will take effect only when [Save Settings] is clicked after a setting is
modied.
11 Angle of Airborne Camera
The angle of the airborne camera can be adjusted within the range of 0-105°.
Map Backup
The ground station system adopts the data platforms of Google Earth and Google Satellite Map. During
map browsing, the system will automatically save the data of browsed maps to the system so that you
can view the browsed maps ofine. However, the map storage capacity of Google Earth is limited (the
maximum capacity of Google Earth is 2G and that of Google Satellite Maps is 1G). When the capacity of
browsed map data exceeds this limit, the old map data will be lost.
In addition, data loss may be caused by misoperation, which will result in the failure of access to Google
Earth data platform after the ground station system is opened.
To avoid loss of map data, data backup software is provided in the Ubuntu operating system. This
software provides the following three functions:
1. Save map data; during use of the ground station, the user can save the map data according to area
partition and date.
Note: The data backup le should not exceed the map capacity limit (Google Earth: 2GB; Google Satellite
Maps: 1GB).
2. Restore map data; in case maps cannot be loaded due to data loss during use, if access to Internet is
also not available, the user can enter this software to restore map data.
3. Delete: Delete undesired backup data.