User's Manual

- 32 -
Connect or close serial ports, load mission, save mission, display track, etc.
7. Video Management Window
(Please see the section of “Functions of Video Management Window in Ground Station Software” for
details.)
8. Navigation Map
Display real-time maps.
9. Navigation Bar
Zoom in, zoom out, change or move map locations.
10.Flight Mission Editor
Green indicates
the current
status of the
mission.
Waypoint list;
the color of a
waypoint icon
changes to
green when
it is clicked,
indicating this
waypoint is
selected.
Attributes of
the waypoint
selected can
be edited:
longitude,
latitude, altitude,
speed, and hold
time.
Historical
information of
system action
is displayed
here. To clear
historical
information,
please click
“Clear All”.
• Click “Edit Waypoint” to reedit the
mission that has been edited.
• Click “Finish Editing” to confirm the
current mission; the color of air route
changes to green.
• To add a waypoint, click “Add Waypoint”,
and double-click the position where you
want to add the waypoint on the map to
add the new waypoint.
• Select the waypoint (green) you want
to delete and click “Delete Waypoint” to
delete this waypoint.
• Click “Upload Mission” to upload the
current ight mission to the aircraft.
• Click “Download Mission” to verify if the
mission is successfully uploaded.
• To delete the mission currently being
edited or to open a new mission, click
“Clear Mission”.
• Click “Edit Waypoint” to reedit the
mission that has been edited.
• Click “Finish Editing” to confirm the
current mission; the color of air route
changes to green.
• To add a waypoint, click “Add Waypoint”,
and double-click the position where you
want to add the waypoint on the map to
add the new waypoint.
• Select the waypoint (green) you want
to delete and click “Delete Waypoint” to
delete this waypoint.
• Click “Upload Mission” to upload the
current ight mission to the aircraft.
• Click “Download Mission” to verify if the
mission is successfully uploaded.
To delete the mission currently being
edited or to open a new mission, click
“Clear Mission”.