User's Manual

- 28 -
No. Name Function description
1 Support rod
It is used to support the screen panel when the ground station panel
is open; it can be taken in when the panel is closed; use a screw to x
it.
2 Main power indicator It will be on when the main power switch is turned on.
3 Charge indicator
It is red during battery charging and green when the battery is fully
charged.
4
External DC power
interface
Connect to an external power adapter to supply power to the system
or charge the battery.
5 Main power switch Turn on/off the main power.
6 Start Main Unit Button Turn on/off the operating system of the ground station.
7 Cooling fan It is used for heat dissipation of the ground station.
8 Left joystick
It is used for manual control of aircraft ight, including two channels,
namely, yaw and throttle.
9 Right joystick
It is used for manual control of aircraft ight, including two channels,
namely, roll and pitch.
10 Network interface Connect to external network
11 USB Connect to external USB device
12 Wiring sealing plug Protect the connecting wires.
13 Auto/manual y switch Switch between manual y and auto y
14 Radio antenna interface
Transmit ight commands; receive ight attitude, sensor information,
longitude and latitude, etc.
15 Video antenna interface Receive real-time video signals of the aircraft
16
Airborne video recording
button
Press the airborne camera once to start recording