User Manual

aee.com
6
2 Preparing the Quadcopter
The quadcopter includes a built-in ight control system and motors etc.
2.1 Introduction
[ 1
]
[ 2
]
[ 3
]
[ 4
]
[ 5
]
[ 6
]
[ 7 ]
[ 8 ]
[ 10
]
[ 11
]
[ 9
]
Figure8
[ 1 ] Propellers [ 2 ] Motor [ 3 ] Front Indicator
[ 4 ] Camera Cage [ 5 ] Landing Gear [ 6 ] Quadcopter Battery
[ 7 ] Tail Indicator [ 8 ] Power switch [ 9 ] Rear Indicator
[ 10 ] Battery Level LCD Segment Display [ 11 ] Battery Level Check button
2.2 Flight Control System
AEE AP9 is equipped with AEE ight control system to provide incredible ease of use and stability. In addition to supporting basic ight maneuvers such as climb,
descend, roll and pitch, it also supports failsafe protection, battery level alarms and other functions.
System Component Modules Function
Master Controller Core module of the ight control system. Connects and controls all modules together.
GPS & Compass Used for positioning and navigation.
Indicator Indicates current ight control system status. Used to navigate during night ight.
2.3 Flight Indicator
There are three Flight Indicators, namely, the Front indicator, Rear indicator and Tail indicator. When the Quadcopter switch is turned on, the LED Flight Indicators
will be on. The Front indicator is green and the Rear indicator is red. (Hereafter use Green/Red Indicator to describe Front/Rear indicators respectively).