User Manual

aee.com
4
Transmitter
S2
NULL
NULL
S1
NULL
S3 S4
GPS
NRM
Figure2
Preparations before ight
Refer to the following for installing components and pre-ight quadcopter check.
1 Preparing Batteries
Ensure all device batteries are fully charged before operating AEE AP9.
Device Power Supply
Transmitter Load 4 AA batteries for power supply.
Quadcopter Charge quadcopter batteries for power supply.
The following instructions are for the quadcopter battery.
1.1 Quadcopter Battery Introduction
The quadcopter battery (Figure 3) is a specically designed battery for AP9 with charge and discharge management functionality, with 5300mAh capacity and voltage
of 11.1V. Only use the dedicated quadcopter battery charger (Figure 4) provided by AEE, for charging.
Battery Charger Indicator
Figure3 Figure4
Short press the Battery Level Check button (Figure 5). Battery Level LCD Segment Display displays appropriate battery level. Please fully charge the battery if it is
less than two bars.
Battery Level
Check button
Battery Level
(Segment Display)
Figure 5