User's Manual

aee.com
-10-
c. View: This parameter involves three types of views: broad view ( ), medium view ( ), and narrow view ( ).
The following example shows the same picture in different views:
The preceding views apply only to the 1080P or 1080i HD video recording and photo modes. You can select a
view angle as you desire.
d. Bit rate: This parameter can be set to High bit rate ( ) or Normal ( ). If this parameter is set to High, pictures are
clearer, but the file size increases.
e. Laser SYNC video: Select” “to enable the laser indicator, or select” “(the default option) to disable the laser
indicator.
f. Time lapse: In the preview state, press the "M" key to enter the video recording setup interface, choose "Time lapse" and set the
desired interval settings.The available options are OFF(the default option),0.1s,0.5s,1s,2s,5s,10s,30s.
g. Pre-video: In the preview state, press the ”M” key to enter the video recording setup interface, choose”Pre-video” to
enable the pre-video recording function.
In this mode, press the “Video key” to enable the pre-recording function, that is the video recording starts without
saving the data; press the Video key again, the last a few seconds of the pre-recorded video will be saved as the starting
part of the video recording file.
h. Auto video: In the preview state, press the “M” key to enter the video recording setup interface, choose “Auto video”,
and set the count-down time before the automatic video recording. The available options are OFF, 5 s, 10 s, or 20s.
i. 180°photo rollover: In the preview state, press the “M” key to enter the video recording setup interface, and choose
“180° Photo Rollover”.
This function allows you to shoot photos from any angle. The 180° photo rollover function is unavailable for video
recording in WVGA/100fps and WVGA/120fps modes.