User's Manual

- 15-
If the 'Self-timer Delay Time” has been set, but the
machine is restarted without pressing “Shutter” key, the
machine will auto set the 'Self-timer Delay Time' at the
state of 0s;
e.Image resolution: Select 3M, 5M or 8M;
(3)Setting of system parameter:
a.Key tone: Turn on or turn off the key tone;
Note:
Voice of photo shooting and video recording cannot be
turned off through this item. It only turns off the key
operation voice and there is no switch to turn off voice of
photo shooting and video recording in the machine
system.
b.Time display: Please set before using; the machine will
auto record the shooting date and time when shooting
image and display on the bottom right corner of the file;
c.Loop coverage: The video/audio file will be auto saved in
segment once every 15 minutes when setting “ Loop
Coverage”; and if it is not set, the video/audio file will be
auto saved in segment once every 30 minutes.
Note:
The current actual segment file is determined by the file
size set, but not determined by the true time, that is to say,
the file will be segmented more than 15/30 minutes at a
dark environment.
d.Auto standby: Select the auto standby time of 0, 2
minutes, 5 minutes or 10 minutes. In case of no any
mission and operation after selecting, the system will
start timing and SD20 will turn off input and output to
enter the standby mode at the end of the time set. If
there is any operation in timing, the system will re-
time.If the video recording or shutter is operated in the