User's Manual

- 12-
D.Spare storage capacity: Information of whether it has
external card " " and spare storage capacity " " can be
viewed on the bottom right corner of TFT display screen;
E.It cannot respond to operations of "<" and ">" under the
preview state;
F. SD20 can be charged with the attached power supply or
USB cable. The “ Red Indicator of Working/Charging”
on the top of the machine will twinkle slowly in charging
and it will be bright constantly after fully charging. The
charging duration is about 3.5h;
Note:
Before use, please check if there is enough battery power.
In case of a low battery power, please charge SD20 via the
attached power supply or USB cable. The “Red Indicator of
Working/Charging ” will twinkle slowly in charging and
remain red with the battery icon“ ” displayed on the TFT
display screen after charging.
(2)Format the Micro SD card
Please select a high-speed Micro SD card only and format
it on SD20 before recording any video and voice or
shooting any photo. If the Micro SD card has ever been
used on other devices, please format it on SD20 before
any operation for normal usage.
Note:
Please confirm whether files in internal memory of SD20
and in Micro SD card are needed before operating;Locked
files of SD20 also can be formatted to remove;
In preview mode, press “ M” key to enter the menu
interface, press “>” key to shift to the setup interface “ ”,
press “ -” key to select the menu “ Date/Time” , and then
press “OK” key to enter the setup interface of “Date/Time” .
(Note: To press “M” key can exit from the setup interface)
(3)Set the date/time