User's Manual

In case of successful calibration, the power indicator will remain on without flashing. If the
power indicator still flashes 20s later, it means the calibration fails. Power off the UAV and
then restart it. If the power indicator still flashes, recalibrate the UAV.
IX. Notes
1. Use the UAV in an indoor environment with calm air.
2. Disable the obstacle avoidance function in a narrow space.
3. If the image received from the UAV is displayed on the APP in an unsmooth or highly
delayed way, restart the APP.
4. Do not insert any finger or easy-to-wind object into the housing.
5. To install the battery or power on the UAV, keep the UAV in horizontal condition rather
than hold it in your hands.
6. Start the APP upon successful Wi-Fi connection. If no image is displayed in 20s, shut
down the APP thoroughly in the background and then restart it.
7. Do not walk around in headless mode.
8. To use the shooting/recording function, insert a SD card and power on the UAV.
9. If the power indicator flashes slightly after powering on the UAV and connecting it to the
APP, calibrate the UAV.
10. Calibrate it if the UAV deflects or shakes in the flight.
11. The motion mode is available in the flight only.
12. No flight is allowed in extreme weather conditions, even in an indoor environment (the
UAV tends to be unstable in extreme weather conditions where the barometric
pressure used to determine the altitude is changed).
X. Safety Instructions on Battery
Disclaimer
Providing relevant operation and maintenance safety instructions, this Guide is applicable
to AEE CONDOR360 UAV and its battery only.
Please read the precautions and warnings contained herein carefully before using the
UAV and its battery. We shall not be held liable for any consequence caused by improper
use.
Working Temperature
Charging: 0℃~40℃.
Discharging: 0℃~40℃.
Precautions
1. To prevent risks and product damage, use the original battery and charger specially
designed for SPARROW UAV and approved by AEE only.
2. Using any battery or charger other than specified above may shorten the UAV’s or
battery’s service life or cause product faults or even battery fire or explosion.
3. Never insert the battery into the UAV reversely.
4. If any electrolyte splashes onto your eyes or skin in case of battery leakage, rinse with
clear water and ask for medical help immediately.
5. Make sure the battery is fully charged before each flight.