Use Instructions

3）After a while, the doorbell will play a sound
indicating that the connection is successful. At this
point, please set a name for the doorbell on the App
and select the location where you want to place the
doorbell. Click Finish to complete the pairing.
When you hear "Password error", check if the Wi-Fi
password you entered in the App is correct;
When you hear "Authentication method error",
please make sure that your Wi-Fi network is not in
an enterprise-level network connection method, as
the doorbell only supports networks with a security
level below WPA-2;
When you hear "AP does not exist", please check if
you have selected or entered the correct Wi-Fi name.
Please place the doorbell near the Wi-Fi router and
make sure the router is powered on. Also, please
note that 5 Ghz Wi-Fi cannot be searched by the
doorbell either;
When you hear "IP acquisition timeout", it means
that you have too many devices connected to the
router to connect more devices, please delete some
infrequently used devices or reboot the router to
clear the unconnected doorbell whose lease has
expired, and you may need to contact the router
administrator;
Possible problems with binding: