Use Instructions

2）Fixing the bracket
Fixing with screws: After the bracket is aligned with
the positioning hole, tighten the screws to the wall to
fix the bracket with a Phillips screwdriver, and ensure
that the installation position is flat and the
surrounding environment is not blocked.
Fixing with 3M: Place the bracket with the 3M
adhesive attached to the corresponding marked
position, and press hard on the bracket to ensure that
the paste is firm. During the process, careful alignment
is required to avoid problems such as angle deviation,
uneven paste, and access difficulty.
3）Fixing the doorbell
Install the lower end of the doorbell on the bottom of
the bracket, and then snap it into the bracket from
bottom to top. When you may hear a "click" sound,
the doorbell is well installed!