Operation Instruction

󾙒󾙘 󾙒󾙙
You can place the camera on a shelf or other surfaces
to use, or you can install it on a wall to use.
Please install the camera in a position where its
view is not blocked and ensure that it is within the
coverage of the Wi-Fi network.
(1) Select a good spot for your camera
Install the camera
Use the drilling tool to punch holes on the wall according
to the hole distance of the base. It is recommended to
mark the holes on the wall with a pencil before drilling.
Screw the expansion nut into the holes on the wall, and
then connect the bracket to the expansion nut with
screws to complete the fixing.
(2) Install the bracket
Remove the protective film on one side of the 3M
adhesive and stick it to the mounting surface of the
bracket. Then remove the protective film on the other
side to fix the mounting bracket in the installation
position. (The installation surface must be clean,
smooth and dry. It is not suitable for uneven wood,
leather and stucco walls. Please press and hold the
bracket on the installation position for 3 minutes to
achieve the best gluing performance)
2).Screw fixing:
1).3M adhesive fixing: