User's Manual

VG22-GSPL-WIREDBTPCRGBSOUNDBAR
Gaming Soundbar
VG22-GSPL-WIREDBTPCRGBSOUNDBAR
Gaming Soundbar
Product Description：
Bluetooth Mode:
Specifications:
1. Volume & Mode Adjustment Button
• Long press to power on/off.
• Press once to change the light mode.
• Double-click to switch between
Bluetooth or AUX.
• Turn to adjust volume.
2. FX LED Light Bar
3. Analog Input: 3.5mm audio jack
4. Power: USB-Powered 5V
Long press the Volume button to power on the soundbar. The default sound output is
AUX mode. Double-click the Volume button to switch from AUX mode to enter Bluetooth
pairing mode. From your mobile phone or computer, search for the Bluetooth device
named "GS_Soundbar", and then click Connect. Once pairing is successful, you will hear
a confirmation tone.
Note: Double-click the Volume Button to switch back to AUX mode.
• Bluetooth Version: 5.3
• Bluetooth Range : Up to 394 in
• Power Output (RMS): 5W x 2
• Speaker Unit: 2in × 2
• Frequency Response: 60Hz-20KHz
• Power Supply: USB 5V/1A
• USB Cable Length:58.3 in
• Product Size: W 15.6in×D 3in×H2in
• Controls: Volume Control
•Features:
o 3.5mm Audio Cable input
o Bluetooth
o FX RGB LED Light Bar
Package Contents:
1 x Speaker
1 x User Manual
USER MANUAL
SET UP
90 mm
120 mm
USER MANUAL
WARNING
FCC ID:2AA3HP10031
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 20cm between
the radiator and your body.
Caution:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operating to conjunction with any other antenna
or transmitter.
That separate approval is required for all other operating configurations,including portable
configurations with respect to Part 2.1093 and different antenna configurations.