User Manual

5.Pause
While the robot is operating, press on the App, the remote control or on the robot to pause it and press to resume cleaning.
6.Sleeping
The robot will automatically enter sleeping mode after 5 minutes of no operation. Press on the App, the remote control or on the robot to
start it up again.
Warning: After 12 hours of no operation, the robot will turn automatically off. The robot will not enter sleeping mode during charging.
7.Scheduling
Warning: the robot cannot be scheduled from more than one device at a time. Make sure to schedule it eight from the mobile phone App or
from the remote control.
The robot is provided with a schedule function in order to provide a maximum-efficiency cleaning. The time setting and the cleaning
schedules must be carried out from the remote control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note: make sure the robot is activated and that the light indicator is lit up before scheduling any cleaning or setting time.
03
8.Current Time
1. Long press the button. The first 2 digits, indicating the hour, will start blinking.
2. Use the up and down direction buttons to set the current to set the current time. Use the left and right buttons to switch from hours to minutes
and repeat the before step.
3. Press the schedule button again to save the settings.