User's Manual

Last change:
2012-3-1
User Manual HL1928M-L/R
Page 7 of 32
Failure to observe the warnings may result in substantial damage to
property.
Provide sufficient heat dissipation
Holes are provided at the rear of the housing. The display must be placed or
secured on a hard, level surface at least 10cm from the wall and 15cm away
from other devices. Several displays can be butt-mounted horizontally and
vertically.
The following must be observed when mounting (VESA connection):
Mounting screws
Number 4
Thread M4
Strength 12
Immersion depth
Min. 10 mm; Max. 12
mm
Torque Max. 3 Nm
The permissible ambient temperature range (5 °C ... 40 °C) must not be violated.
Do not subject device to unnecessary shocks. Take care when transporting!
Use the original packaging! The panel in particular should be protected
against shocks.
When touching the panel surface, the mechanical contact or an electrical
discharge may cause a brief disturbance in the picture quality.
Care of unit / cleaning agents
− The front panel is extremely sensitive to mechanical damage. Avoid all
scratches, knocks etc.!
− Remove water drops immediately; extended contact with water discolors the
surface.