User's Manual

Last change:
2012-3-1
User Manual HL1928M-L/R
Page 11 of 32
4.1.2 Cable (attaching)
Connect the cables to the display.
VGA connector: the flat panel display can be connected to the computer system
using a VGA Cable. The display is adapted using an OSD menu.
BNC connector: the flat panel display can be connected to the video camera
using a BNC Cable . The display is adapted using an OSD menu.
DVI connection: The connection to the computer can also be made via the
digital single link. The picture quality, noise immunity and radiated interference
of the complete system depend on the cable quality and length.
DIN6 connection: you can connect the display via the DIN6 connector to the
computer for firmware updating.
Serial connection：you can connect the touch screen via the Serial connector to
the computer to control the touch screen.