User's Manual

19" LCD MONITOR

REV A

15-pin Sub-D connector: the flat panel display can be connected to the

computer system using the Sub-D connector. The display is adapted using an

OSD menu.

DVI connection: The connection to the computer can also be made via the

digital single link or via the analog channel of the DVI connection. The

picture quality, noise immunity and radiated interference of the complete

system depend on the cable quality and length.

Serial connection: you can connect the display via the 9pin D-SUB connector

to the computer for firmware updating.

4.1.3 Little cover (attaching)

Lead the monitor end of the cables through the little cover’s cable duct.

Connect the little cover to the rear cover.

4.2 Switching on the display

Switch on the flat panel display using the power switch. The operation LED