User's Manual
Page 1 of 29
1. Application
This high-resolution color display is specifically designed to meet the
rigorous performance standards needed for diagnostic, interventional
radiology, and other medical applications. To guarantee image integrity,
features include accurate signal conversion and a wide range of interfacing
options.
Compact design -Low weight and small size with improved performance
make the color flat panel display HL1916 SERIALS preferable to conventional
CRT monitors.
Embedded LUT(Look Up Table )-This monitor is factory calibrated to achieve
DICOM part 3.14 compliance and Linear gray level reproduction at the factory
set point. Five different settings are stored within the display.
Screen resolution- HL1916 SERIALS is equipped with a panel with Super In
Plane Switching technology. The optimal picture resolution is 1280 x 1024
pixels. Video signals with other resolutions typical to medical engineering are
optimally zoomed in or out to the screen size.
Fast backlight stability- The luminance stabilization circuit employs a built in
photo sensor to keep the back-light lamps at a constant luminance for
consistent calibration over the life of the display and can control the back light
system automatically to extend the life of the monitor and achieve very short
warming up time.
Multi-interface for video inputs- Support DVI-D, VGA, DisplayPort, BNC
(combined with optional BNC cable) video inputs.
Embedded full functional stand base - The stand base is embedded inside
the monitor and can be easily removed. The stand base is up/down and tilt
adjustable.
HL1916LB, HL1916LBT has a touch screen with USB connector on the LCD,
Sales without USB cable.