User's Manual

Page 23 of 29
8. Technical data
All technical data are valid after a warming-up period of 2 hours.
8.1 Display
Type TFT, color active matrix
Display area 376.32m x 301.056 mm
Picture
diagonal
19" or 48 cm
Native
resolution
1280 x 1024 (full-screen format)
Pixel
organization
3 vertical sub pixels
Pixel pitch 0.294 mm x 0.294 mm
Contrast ratio Typically 1000:1
Horizontal
viewing angle
Typically ± 89°
Vertical viewing
angle
Typically ± 89°
Backlight 4 dual CCFT (cold cathode fluorescent tube)
Brightness MIN 230 cd/m² Factory setting: 180 cd/m²
Lifetime of
backlight
50,000 hours typically for CCFT
(applies to an ambient temperature for the backlight of 25°C )
8.2 Power supply
Input Voltage AC100-240V± 20%, 50 / 60Hz; <1.1A
Normal
operation
<50W
Power
Consumptio
n
Power
saving
<5W
Power
Supply
Input Connector 3P IEC Type
8.3 Electronics
Multi-standard
technology
Video modes with resolutions less than 1280 x 1024 can be expanded
to the TFT resolution, and thus utilize the full display area (like
multi-sync CRTs).
In the same way, resolutions higher than 1280 x 1024 can be reduced
and then displayed. (Caution: depending if the timing is frame buffered
or frame sync, image information might get lost; the gray levels - the
color depth for color images - will also be reduced and might be visible)
Timing recognition H frequency, V frequency