User's Manual

BIGTIDE DS01 V3.0
User’s Manual
Danger
There is a danger to life if the warning information is not observed. Severe
personal injury or damage to property may occur.
1. Do not open the unit yourself, because certain components inside the units are at
high- voltage.
2. Only use a perfect power supply cable, because a damaged power supply cable
may result in a fire or electric shock.
3. Only use the same type of fuse 3.15A/250V
4. Do not insert any objects into the housing, because objects inserted into the
housing may result in damage to the unit.
5. Do not expose the unit to rain or excessive moisture.
6. Do not hurt yourself when moving the unit.
Warning
Incorrect installation may result in extensive damage to property. Installation should be
carried out by trained personnel.
1. When installing your electrical system with our products, please observe the safety
requirements of EN60601-1-1 (IEC601-1-1).
2. Take appropriate measures to particularly ensure that discharge currents remain below
the required limits.
Appropriate measures:
• Disconnecting devices for signal input and output unit.
• Use of a safety transformer.
• Use of additional PE conductor.
3. Only use the signal cables and interface cables specified by the manufacturers for the
installation
4. Use power cords with a PE contact.
Only insert into sockets with a PE contact.
5. Provide sufficient heat dissipation
Slots are provided at the sides of the housing.
These slots are provided to prevent overheating of sensitive components inside.
These slots must never be blocked by other objects.
6. The permissible ambient temperature range (0ºC to 45ºC) must not be violated.
7. Take care when transporting! Use the original packaging!
8. The device could be sent back to the manufacturer for recycling or proper disposal
after their useful lives. Alternatively the device shall be disposed in accordance with
national laws after their useful lives.
- 3 -