User's Manual

BIGTIDE DS01 V3.0
User’s Manual
1. Introduction
This manual describes the safety precautions, specification, operation, installation of
the Bigtide DS01 DVI Splitter.
The BigtideDS01 is a DVI Splitter with one input and four outputs.
The DS01 distributes a single DVI-D input to four DVI-D outputs.
The DS01 has DDC functions by itself.
The DS01 is able to switch DDC automatically according to the preset priority.
The DS01 drives each DVI-D up to 15m at a resolution of 1600×1200@60Hz or
1920×1200@60Hz (24AWG STP).
The DS01 is able to pass the eye diagram testing.
The DS01 is powered by 100～240VAC power supply.
The DS01 can be mounted in a rack, in a drawer, on a wall, under a desk, or set on a tabletop. It
can also be used side by side.
The unit is engineered to meet all rigorous safety requirements, including UL, CUL, CE,
CCC, and to meet all rigorous EMC requirements.
The unit can fulfill QR Med6 requirements and RoHS Compliance.
2. Safety precautions
Caution
Read instructions
Read and understand all safety and operating instructions before using the device.
Follow warnings
Follow all warning and instruct ions marked on the device or in the user information.
Regular maintenance are recommended
Correct and safe operation of the DVI splitter is dependent on proper transport, storage,
installation and assembly, as well as careful operation and maintenance.
For the sake of safety, the following precautions must be observed:
- 2 -