User's Manual

BIGTIDE DS01 V3.0
User’s Manual
3. Power on the unit and the desired display devices.
4. Power on the video source device.
Note
DDC communication is between the video source device and the desired display device
connected to the DVI output connector of the highest DDC priority.
5. Fault diagnostics
Fault Cause Remedy
Broken fuse Inform servicing department. operation LED off
Power cord not inserted
or incorrectly inserted
Insert power cord.
No picture appears on
the display device,
operation LED green
No video signal into the
display device
Check DVI-D cable and its connection.
Abnormal picture
appears on the display
device, operation LED
green
Abnormal video signal
into the display device.
Check DVI-D cable and its connection.
operation LED orange No video signal into the
unit
Check video source and DVI-D cable
connection.
6. Remarks and contact address
Invalidity of guarantee
All unauthorized electrical or mechanical alterations on or in the unit result in loss of the
guarantee.
Information on the User’s Manual
For clarity reasons, this User’s Manual does not contain all detailed information on this product.
Your attention is additionally drawn to the fact that the contents of this User’s Manual are not part
of a previous or existing agreement, commitment or statutory right and do not change the latter.
Guarantee
All commitments on the part of BIGTIDE are contained in the respective sales contract which also
contains the complete and solely applicable warranty conditions. These warranty conditions in the
contract are neither extended nor limited by the contents of User’s Manual.
- 16 -