User's Manual

BIGTIDE DS01 V3.0
User’s Manual
4. Connections and start-up
Caution
In order to ensure safety operation of the equipment, close attention must be paid to the
information contained in this User’s Manual as well as the warnings in section2 “safety
precaution”.
DDC switching
1. The unit has DDC functions by itself.
2.
DDC switching priority:
Highest Output1→Output2→Output3→Output4→Device itself Lowest
Front panel
OUTPUT3
DVI-D
OUTPUT4
DVI-D
OUTPUT2
DVI-D
OUTPUT1
DVI-D
POWER/SYNC LED INDICATOR
FRONT PANEL
Figure 16
Output DVI-D female connector
The output DVI-D signal with a resolution of 1600
×1200@60Hz or 1920×1200@60Hz can
be driven up to 15m over DVI cable made of 24 AWG STP cable.
Power/sync LED indicator
Power input on without DVI digital sync input: LED light and color orange
Power input on with DVI digital sync input: LED light and color green
Power input off: LED extinguished
Note
1.
The transmission distance varies greatly depending on the signal resolution, the type of
DVI Cable, graphic card, and display used in the system.
2. Although DVI dual link connectors are used, the device is only compatible with
single-link DVI-D video signals.
- 13 -