User's Manual

Page 19 of 26
Input
Source
DVI-D
DP
VGA
Select the active input source
priority.
If you call this OSD menu, the current
source is displayed. If current source
is inactive (NO sync) and, it will auto
search other port.
Auto Adjust
(Analog only)
Auto-Color ON / OFF Automatically get input signal
match with the monitor
Auto-Configure ON / OFF Automatically adjust the image display
settings.
Execute The selected auto functions are
executed.
Note: The quality of the function
depends on the applied picture
contents. To get better effect it is
recommended to apply full screen
picture and including white and dark
contents.
OSD Settings Horizontal
position
0 … 255 Adjustment of OSD horizontal position
Vertical
position
0 … 255 Adjustment of OSD vertical
position
Background 0 … 12 Select the OSD background transparency
LED ON/OFF Setting the status of the operation
LED.
Language English Use the "Language" menu to select the
language of the OSD menu.
English is the default.
While in the English menu state the ”
中文” font means to select to Chinese
menu. And while in Chinese menu state
the “English” font means to select to
English.
中文
Information Firmware version
OSD version
Config version
Power saving
Input Source
LUT
Working hours
Current display status can be
informed。
Service Level 2 Settings in this menu must only be carried out by service person*
Exit Reject changes
Accept changes
Quit OSD
Check box for save or reject the
changes when
Quit OSD menu .
7. Fault diagnostics
Fault Cause Remedy
No picture appears on Broken fuse Inform servicing department