User's Manual

Page 1 of 26
1. Application
This high-resolution color display with touch screen use is specifically
designed to meet the rigorous performance standards needed for diagnostic,
interventional radiology, and other medical applications. To guarantee image
integrity, features include accurate signal conversion and a wide range of
interfacing options.
Compact design -Low weight and small size with improved performance
make the color flat panel display HL1916S SERIAL preferable to
conventional CRT monitors.
Embedded LUT(Look Up Table )-This monitor is factory calibrated to achieve
Gamma2.2 compliance and Linear gray level reproduction at the factory set
point. Six different settings are stored within the display.
Screen resolution- HL1916S SERIAL is equipped with a panel with Twisted
Nematic technology. The optimal picture resolution is 1280 x 1024 pixels.
Video signals with other resolutions typical to medical engineering are
optimally zoomed in or out to the screen size.
Fast backlight stability- The luminance stabilization circuit employs a built in
photo sensor to keep the back-light lamps at a constant luminance for
consistent calibration over the life of the display and can control the back light
system automatically to extend the life of the monitor
Multi-interface for video inputs- Support DVI-D, VGA, DisplayPort.
Embedded full functional stand base - The stand base is embedded inside
the monitor and can be easily removed. The stand base is up/down and tilt
adjustable.