User's Manual

Page 16 of 26

6.3.3Key functions in the OSD menu

Key(s) Situation Action

Always Jump to next line

Slide controller Increase value

Command "Enter key"

Down

Slide controller Decrease value

Set

Sub-menu Return to previous menu

6.3.4 Menu calls

Press the “Menu” key while the OSD is active, the function icon will jump to

next line. Pressing the “Up” key, the coordinate submenu will be selected.

Press “Set” key to return to the main menu while in the submenu state.

6.3.5 Locking of OSD menu

Keys Action

1x Set key,

then 3x Up key

Lock or unlock OSD

6.3.6 Description of the menus

Main Menu Function Adjustment range Description

Performance Brightness 0…100

Set brightness.

Adapting the image quality of darker

picture areas. The center point is in 50

position.

Note:

The brightness settings are

already optimized for digital signals.

Manual changes to these values are not

recommended, as this can result in an

impairment of picture quality (loss of

grayscales).