User's Manual

Page 15 of 26
6.3 OSD menu
6.3.1 Keys assignment and operation LED
A “dynamic help for keypad function” is available for each menu: it explains
the role of each key depending on the OSD menu window, which is
currently active.
6.3.2 Key functions without active OSD menu
Key Action
Menu Activate OSD
Up Define VGA port
Down
Select DVI-D,DP, VGA input source
Note:
While there is no sync in VGA input, there is instruction on the OSD to indicate that how to define the
analog input as VGA input. Press and hold the ‘UP’ key for about 2 seconds, the monitor will change the
analog input between VGA.
The ‘Down’ key function is used to select input source and is enabled only when OSD menu is
locked. This function can be enabled or disabled through OSD selection. This choice is in case all
the signal sources are available. If not, the monitor will auto search DVI-D, DP and VGA.
Menu Up Down Set LED