User's Manual

19" LCD MONITOR
REV A
21
Execute
selected auto
function
The selected auto functions are executed.
Note: The quality of the function depends
on the applied picture contents. To get
better effect it is recommended to apply
full screen and including whiteness
contents picture.
Auto Adjust
On Mode
Change
Enable or disable automatically get input
signal match with the monitor, when the
signal mode is changed
Language
English
Chinese
Select the language of OSD menu.
Note: English menu is default state.
You can make further settings for the
picture source
Frequency
/Phase
(analog input
only)
Adjust the frequency and phase of the
input signal.
Sharpness
Interpolation
filter 1 to 7
One of the 7 filters can be selected for the
focus setting to reduce scaling artifacts.
Interpolation filters depend on the input
resolution. A filter is not usually used
with 1280X1024 since each pixel is
controlled by its own pulse. The user
should individually adjust the filter
depending on the application. The default
interpolation filter position is 1.
OSD setting
H position
V position
Adjustment of OSD horizontal position
Adjustment of OSD vertical position
(Default state is on the 3/4 bottom right
corner of the screen)
Others
Hot Key Enable or disable the Hotkey. The up key
is used for brightness, down key is
used for Auto Adjust, when keys are
locked. The Up key is used for mode
select from custom ,sRGB, when keys are
unlocked.