User's Manual

19" LCD MONITOR
REV A
20
Set user color
Red Gain
Green Gain
Blue Gain
Red bias
Green bias
Blue bias
0…255
-50…50
Define user color temperature
Select Red, Green, Blue gain and Red,
Green, Blue bias separately. The default
state is in 255 position and color 1 state.
Red, Green, Blue gain are used to adjust
white color temperature.
Red, Green, Blue bias are used to adjust
Red, Green, Blue bias separately. It is
used adjust the dark color temperature.
The default state is in 0 position.
Note: due to LCD panel characteristic it
is not recommended to change the bias
too much from 0 point.
H Position 0…100 Shift picture in horizontal direction
Position
(Analog
input only)
V Position 0…100 Shift picture in vertical direction
Picture Source
VGA
(DVI-A)
DVI-D
Select source for main display
When you enter this OSD menu the
current source is highlighted.
Following switch off and on of the
display, the picture sources are searched
one after another.
The auto functions are used to assist the
automatic setting of parameters. The
quality of settings depends on the picture
contents and the type of synchronization.
Corresponding items in the OSD can
adjust all settings finely.
Auto brightness
/contrast
On/Off
Automatically get input signal match with the monitor
Auto
function
(Analog
input only)
Auto position
/phase
/frequency
On/Off
Automatically adjusts the image position,
H-Size (or V-Size) and Fine settings.
Improve focus clarity and image stability.