User's Manual

19" LCD MONITOR

REV A

Connect the cables to the display.

To remove the power cable ,first remove the strain relief .It is used for

protecting the connection. As the following figure shows. When fixing the

power cable, reverse the steps.

15-pin Sub-D connector: the flat panel display can be connected to the

computer system using the Sub-D connector. The display is adapted using an

OSD menu.

DVI connection: The connection to the computer can also be made via the

digital single link or via the analog channel of the DVI connection. The

picture quality, noise immunity and radiated interference of the complete

system depend on the cable quality and length.

Serial connection: you can connect the display via the 9pin D-SUB connector

to the computer for firmware updating.