User's Manual
Table Of Contents
- Customer Specification
- HL1916
- 1. SCOPE
- 2. ELECTRICAL PERFORMANCE
- 2.1 Power Supply
- 2.2 Power Management
- 2.3 Signal Interface
- 2.3.1 Signal Specifications
- 2.3.2 D-SUB Connector and Pin Assignment (Figure1)
- 2.3.3 Digital Visual Interface and Pin Assignment (DVI)
- 2.3.4 Control Interface
- 2.4 Product Features
- 2.5 Screen Performance
- 2.5.1 Standard Testing Conditions
- 2.5.2 Brightness
- 2.5.3 View angle
- 2.5.4 Brightness Uniformity
- 2.5.5 Contrast radio
- 2.5.6 White Color Coordinates
- 2.5.7 Response Time
- 2.5.8 Color Gray
- 2.5.9 Gamma Curve
- 3. OPERATING GUIDE
- 4. MECHANICAL SPECIFICATIONS
- 5. ENVIRONMENT CONDITONS
- 6. DEFECT, SCRATCH and DUST
- 7. NOTICE FOR HANDING
- Appendix 1 Preset Timings
Last change: 27
th
, Oct. 2005
Copyright @ SSME (SIEMENS
Medical Equipment Ltd.) All
rights reserved
HL1916
Page 9 of 32
2.4 Product Features
Specification
Item
Analog Input Digital Input
Panel Module LG.PHILIPS LM190E05-SL02
Size 19.0” (48 cm diagonal)
Active Display Area 376.32 (H) x 301.056 (V) mm
Resolution 1280 x 1024 dots (SXGA)
Pixel Pitch 0.294(H) x 0.294(V) mm
Color Depth 16.7M true 8 bit
Luminance 280 cd/m2 (typical); 230cd/m2 (min.)
L 89 degree
H
R 89 degree
H 89 degree
Viewing Angle
(Type.)
CR>10
V
L 89 degree
Contrast Ratio 600:1 (typical); 400:1 (min.)
LCD
Back Light CCFL x 6pcs.
Horizontal frequency 31kHz -82kHz 31kHz -82kHz
Vertical frequency
50.0Hz - 85.0 Hz
(Non-Interlaced)
50.0Hz - 85.0 Hz
(Non-Interlaced)
Video Signal Analog RGB Digital RGB
Sync. Signal
Separate Sync. (TTL)
Composite Sync.
Sync on green
TMDS
Pixel Clock 25.0MHz -165.0MHz
25.0MHz
-165.0MHz
Input
Signals
Input connector Mini D-sub 15Pin
DVI-I (D) &
DVI-D
Preset Timings Factory preset: 39 / User preset: 10 *
Control key Select, up, down, exit
Functions
OSD
Backlight Brightness, Contrast, Color control,
Position, Size, Phase, Gamma, etc.
Safety IEC60601-1, CCC
EMC IEC60601-1-2
Regulations
Power Management VESA DPMS, EPA,